Bracelets

Bracelets

1 2
  • This sparkling project gets its beauty through a large number of crystals. The special use of double RAW creates a nice dimensionality. The pattern includes 10 pages with many drawings and illustrations.

    Beading level: 2

    Required...

  • Steppin Out is a sparkling bracelet, a real showstopper! Again a piece that consists of different components that can be combined in different variations. The pattern includes 15 pages with many drawings and illustrations....

  • One leather band, two sliders, so you can wear them matching your mood and your outfit! The pattern includes 19 pages with many drawings and illustrations. A little knowledge in RAW technnique is helpful. 

    Beading level...

  • A whole lot of squiggles are combined in this playful bracelet. The pattern is very detailed and includes 16 pages with many drawings and pictures. Basic knowledge in Cubic Right Angle Weave is required.  

    Beading level:...

  • This project was created especially for less experienced beaders. As in Roundabout, the instructions are very detailed and do not require special knowledge in beading techniques.

    The pattern includes 15 pages with many drawings and...

  • Thgis bracelet reminded me of the good old sine curve from the math lessons at school, but I have to admit, that it is much more pleasant and sparkling! The pattern includes 16 pages with many drawings and illustrations. Knowledge in CRAW is...

  • This project includes alternating CRAW and Double CRAW units and is perfect for learning that technique.

    Just choose the language and open the file. 



  • This bracelet, consisting of beaded rings around a fabric cord, is not a lot of work and so a lot of fun to make!

    The pattern includes 14 pages with many drawings and illustrations.

    Beading level 1-2

    Required...

  • This bracelet reminded me of raindrops hitting the ground. However you may blame it to the actual heatwave! This fun project is explained on 10 pages with many drawings and pictures.

    Beading level 1-2

    Required...

  • A delicate bracelet with alternating bezeled filigrees and Chatons. The pattern includes 16 pages with many drawings and pictures.

    Knowledge in RAW is required

    Beadinglevel 2

    Required supplies:

    4 square filigrees...

  • This bracelet consists of many different Rizo beads and is just fun to make. Due to the colors and shape, it is the perfect summer project. This pattern includes 9 pages with many drawings and Illustrations. All techniques are shown in...

  • This bracelet is soft and flexible and matches every wrist.

    Happy Beading!


  • This bracelet was inspired by floral ornaments of asian architecture. It is not very time consuming  and easy to make and its wide but flat shape makes this suitable for daily use.

    The pattern consists of 15 pages with many drawings...

  • A little Thank You from me to you! Waves is easy to make, also for less experienced beaders. And the experienced ones might like the quick success! An all day wearable piece for you or your friends.

    Enjoy the project, just choose the...

  • This delicate bracelet with the fan shapet units is easy and fast to make. The pattern includes 10 pages with many drawings and pictures.

    Beading level 1 

    Required supplies: 

    For a bracelet of 19 cm including the...

  • This bracelet was inspired by the gorgeous jewelry of the beginning of the 20th century. The center is a filigree, surrounded by sparkling stones. The pattern includes 25 pages with many drawings and illustrations. Basic knowledge in RAW and...

  • This bracelet has some wave shape due to the different sizes of the focals. The use of Cotton pearls and Resin rivolis makes it way lighter than it might seem due to its opulence. 

    Beading level 1-2

    Required supplies: Rivolis...

  • This bracelet appears light and soft but it has a very sturdy construction. The bezeled rectangle stones alternate with elegant loops. You should be familiar with RAW and CRAW to make this design. The pattern includes 14 pages with many...

  • A light sparkling version of a bracelet. It combines chatons and rivolis with gentle arcs on the outline. The pattern includes 16 pages with detailed drawings and pictures.

    Beading level 2

    Required supplies: Rivolis 14mm, chatons...

  • A delicate  sparkling bracelet in a lace style. The pattern includes 14 pages with detailed drawings and illustrations.

    Beading level 1-2

    Required supplies: Round beads and bicone beads 3mm, Seed beads size 11° and 15°,...

  • My favorite occupancy, Beadcrastination, a mix of beading and procrastinating, finally found its project. It is nit very time consuming to finish and again introduces the flat chenille stitch, which makes the base sturdy and compact....

  • A nicely wearable bracelet containing of bezeled rivolis, surrounded by a delicate frame. The pattern includes 14 pages with many drawings and pictures.

    Knowledge in RAW and Cubic RAW required.

    Beading level 2 (Knowledge in RAW...

  • This sparkling bracelet shows little Pyramids on a base of flat Chenille stitch. Basic knowledge is required. The pattern includes 12 pages with many drawings and pictures.

    Beading level: 2

    Dieses funkelnde Armband zeigt kleine...

  • A real statement cuff! 30x 30mm lasercuts are separately bezeled and then combined. With 5 segments, this bracelet has a length of 22cm (8 1/2 inches) Changes in the length are possible and described in the instructions....

  • Firenze is a nice delicate bracelet, that is based on Chenille stitch and covered with different embellishments. The pattern includes 18 pages with many pictures and illustrations. Basic knowledge in CRAW and Peyote required....

  • This bracelet enhances the unique shimmer of the dome beads. The pattern includes 12 pages with many pictures and illustrations. 

    Beading level: 2,basic knowledge in RAW technique required

    required supplies: Dome Beads 14...

  • The structure of this fancy bracelet  reminds of a harlekins collar. The pattern includes 11 pages with many drawings and illustrations.

    Beading level 2

    Required material:Round beads 8mm, firepolished...

  • This bracelet is quite light, although it is almost 5cm high. The unique lasercuts create a very special look. The pattern includes 14 pages with many drawings and pictures. 

    Beading level 2

    Required supplies:  Lasercuts...

  • This rich embellished bracelet shows a double layer of Rivolis and Chatons surrounded by shimmering cotton pearls. It is a real eye catcher.

    The pattern consists of 15 pages with multiple pictures and illustrations. Basic knowledge...

  • Meadow is a nice bracelet, featuring the new Gekko beads. They are arranged to little flowers. The pattern includes 8 pages with detailed instructions, drawings and pictures.

    Beading level 1

    Required supplies: Gekko beads, Delica...

  • Simplicious is an easy to make bracelet with a lovely texture. The pattern is for free, simply choose your language and download it.


  • This bracelet was inspired by scandinavian folk dances.  Although the ruffles make it look big, it is astonishlingly soft and comfortable to wear. The pattern includes 11 pages with many drawings and pictures. Basic knowledge in RAW is...

  • Biology is a very dimensional bracelet. The rivoli is not visible from every angle, which makes this piece even more an eye catcher. The pattern includes 10 pages with many drawings and illustrations. 

    Beading level 2

    required...

  • A sparkling bracelet in an interesting shape, created by a mix of RAW and Hubble stitch. The pattern includes 12 pages with many drawings and pictures.

    Level: 2 (basic knowledge in RAW required)

    Supplies: Chatons 8mm (SS39),...

  • A very elegant and sparkling piece of jewelry, that is "be still my heart". The pattern includes 9 pages with detailed drawings and pictures.

    Beading level 1 to 2

    Required supplies: 4mm bicones and round beads, Seed beads size 11°...

  • A bracelet made from many 6mm round beads. Either colorful or sparkly, just as you like. The pattern includes 8 pages with many drawings and pictures. 

    Beading level 1 to 2

    Required supplies: Round beads 6mm, .seed...

  • These statement Bangles just rock! They are made in netting technique and the shape is created by the bead size only. The pattern is for free, just choose the language and you can instantly download it.


    Required...

  • A beaded caterpillar, that one day, when it grew up, will be a beautiful butterfly.

    This pattern is free. Enjoy it.

  • A very special bangle, inspired by a piece of ancient jewelry that I saw in Villa Giulia in Rome. The nine components are attached in a way, that this bangle is sturdy and flexible in one.

    The pattern includes 14 pages with many drawings...

  • Your wrist will sparkle! 24 Chatons are supported by manc bicones and the facets of Half Tilas. The pattern includes 12 pages with many drawings and pictures.

    Beading level 2

    Required supplies: Half Tilas, round...

  • This statement bangle is "so strong!" The mix of O beads, spiky buttons and bicones creates unique accents. The pattern includes 10 pages with multiple drawings and step by step pictures.

    beading level 1 to 2

    Required supplies:...

  • This bracelet made from bicones rivolis and round beads, is a sparkling beauty and not so labor intensive to be finished.  The three strands of the bracelet sparkle on three levels, which creates a vivid dimensional structure. The...

  • This sparkling bracelet was obviously inspired by the beautiful moon over Tuscany. Despite its size it is still very light weight (23g), which is caused by the use of Cotton Pearls.
    The pattern includes 12 pages with many detailed drawings...

  • This filegree bracelet is not difficult to make. The instructions include many drawings and pictures.

    Beading level 2

    Supplies: Dome beads 12x7mm, firepolished beads, Bicones and round beads in 3mm, seed beads size 11° and 15,...

  • The Joan of Arc bangle comes in three different sizes. Crystals and pearls give it an antique appearance. The pattern includes 14 pages with many detailed drawings and pictures. 

    Required supplies: Chatons 8mm, round beads 3 und...

  • These tiny buttons are just irresistable and sparkle like crazy!

  • A set of 4 bangles, that you should not separate. Knowledge in RAW stitch is required. The pattern includes 15 pages full of pictures and drawings.

    Required supplies: Seed beads size 11° and 15°, Button Beads, Dragon Scale...

  • These bangles are quite elastic and can be nicely pulled over the hand, when made with the right thread. I recommend Sonoko Nozue Beading thread. The pattern includes 11 pages with many drawings and pictures.

    Beading level 2...

  • These bangles are fun to make. They are finished quickly and for sure they will not be alone for a long time. They love to mingle on your wrist and the more the merrier!

    The instructions include 11 pages full of drawings and...

  • The matching kit for the pattern Triple Embraces of the book "Beadwork Evolution". The book must be purchased separately.

    The kit includes all the beads and a magnetic clasp to make this bracelet.

    Needles and thread are not...

1 2