Bracelets

Bracelets

  • This sparkling project gets its beauty through a large number of crystals. The special use of double RAW creates a nice dimensionality. The pattern includes 10 pages with many drawings and illustrations.

    Beading level: 2

    Required...

  • Steppin Out is a sparkling bracelet, a real showstopper! Again a piece that consists of different components that can be combined in different variations. The pattern includes 15 pages with many drawings and illustrations....

  • One leather band, two sliders, so you can wear them matching your mood and your outfit! The pattern includes 19 pages with many drawings and illustrations. A little knowledge in RAW technnique is helpful. 

    Beading level...

  • A whole lot of squiggles are combined in this playful bracelet. The pattern is very detailed and includes 16 pages with many drawings and pictures. Basic knowledge in Cubic Right Angle Weave is required.  

    Beading level:...

  • This project was created especially for less experienced beaders. As in Roundabout, the instructions are very detailed and do not require special knowledge in beading techniques.

    The pattern includes 15 pages with many drawings and...

  • Thgis bracelet reminded me of the good old sine curve from the math lessons at school, but I have to admit, that it is much more pleasant and sparkling! The pattern includes 16 pages with many drawings and illustrations. Knowledge in CRAW is...

  • This project includes alternating CRAW and Double CRAW units and is perfect for learning that technique.

    Just choose the language and open the file. 



  • This bracelet, consisting of beaded rings around a fabric cord, is not a lot of work and so a lot of fun to make!

    The pattern includes 14 pages with many drawings and illustrations.

    Beading level 1-2

    Required...

  • This bracelet reminded me of raindrops hitting the ground. However you may blame it to the actual heatwave! This fun project is explained on 10 pages with many drawings and pictures.

    Beading level 1-2

    Required...

  • A delicate bracelet with alternating bezeled filigrees and Chatons. The pattern includes 16 pages with many drawings and pictures.

    Knowledge in RAW is required

    Beadinglevel 2

    Required supplies:

    4 square filigrees...

  • This bracelet consists of many different Rizo beads and is just fun to make. Due to the colors and shape, it is the perfect summer project. This pattern includes 9 pages with many drawings and Illustrations. All techniques are shown in...

  • This bracelet is soft and flexible and matches every wrist.

    Happy Beading!


  • This bracelet was inspired by floral ornaments of asian architecture. It is not very time consuming  and easy to make and its wide but flat shape makes this suitable for daily use.

    The pattern consists of 15 pages with many drawings...

  • A little Thank You from me to you! Waves is easy to make, also for less experienced beaders. And the experienced ones might like the quick success! An all day wearable piece for you or your friends.

    Enjoy the project, just choose the...

  • This delicate bracelet with the fan shapet units is easy and fast to make. The pattern includes 10 pages with many drawings and pictures.

    Beading level 1 

    Required supplies: 

    For a bracelet of 19 cm including the...

  • This bracelet was inspired by the gorgeous jewelry of the beginning of the 20th century. The center is a filigree, surrounded by sparkling stones. The pattern includes 25 pages with many drawings and illustrations. Basic knowledge in RAW and...

  • This bracelet has some wave shape due to the different sizes of the focals. The use of Cotton pearls and Resin rivolis makes it way lighter than it might seem due to its opulence. 

    Beading level 1-2

    Required supplies: Rivolis...

  • This bracelet appears light and soft but it has a very sturdy construction. The bezeled rectangle stones alternate with elegant loops. You should be familiar with RAW and CRAW to make this design. The pattern includes 14 pages with many...

  • A light sparkling version of a bracelet. It combines chatons and rivolis with gentle arcs on the outline. The pattern includes 16 pages with detailed drawings and pictures.

    Beading level 2

    Required supplies: Rivolis 14mm, chatons...

  • A delicate  sparkling bracelet in a lace style. The pattern includes 14 pages with detailed drawings and illustrations.

    Beading level 1-2

    Required supplies: Round beads and bicone beads 3mm, Seed beads size 11° and 15°,...

  • My favorite occupancy, Beadcrastination, a mix of beading and procrastinating, finally found its project. It is nit very time consuming to finish and again introduces the flat chenille stitch, which makes the base sturdy and compact....

  • A nicely wearable bracelet containing of bezeled rivolis, surrounded by a delicate frame. The pattern includes 14 pages with many drawings and pictures.

    Knowledge in RAW and Cubic RAW required.

    Beading level 2 (Knowledge in RAW...

  • This sparkling bracelet shows little Pyramids on a base of flat Chenille stitch. Basic knowledge is required. The pattern includes 12 pages with many drawings and pictures.

    Beading level: 2

    Dieses funkelnde Armband zeigt kleine...

  • A real statement cuff! 30x 30mm lasercuts are separately bezeled and then combined. With 5 segments, this bracelet has a length of 22cm (8 1/2 inches) Changes in the length are possible and described in the instructions....

  • Firenze is a nice delicate bracelet, that is based on Chenille stitch and covered with different embellishments. The pattern includes 18 pages with many pictures and illustrations. Basic knowledge in CRAW and Peyote required....

  • This bracelet enhances the unique shimmer of the dome beads. The pattern includes 12 pages with many pictures and illustrations. 

    Beading level: 2,basic knowledge in RAW technique required

    required supplies: Dome Beads 14...

  • The structure of this fancy bracelet  reminds of a harlekins collar. The pattern includes 11 pages with many drawings and illustrations.

    Beading level 2

    Required material:Round beads 8mm, firepolished...

  • This bracelet is quite light, although it is almost 5cm high. The unique lasercuts create a very special look. The pattern includes 14 pages with many drawings and pictures. 

    Beading level 2

    Required supplies:  Lasercuts...

  • This rich embellished bracelet shows a double layer of Rivolis and Chatons surrounded by shimmering cotton pearls. It is a real eye catcher.

    The pattern consists of 15 pages with multiple pictures and illustrations. Basic knowledge...

  • Meadow is a nice bracelet, featuring the new Gekko beads. They are arranged to little flowers. The pattern includes 8 pages with detailed instructions, drawings and pictures.

    Beading level 1

    Required supplies: Gekko beads, Delica...

  • Simplicious is an easy to make bracelet with a lovely texture. The pattern is for free, simply choose your language and download it.


  • This bracelet was inspired by scandinavian folk dances.  Although the ruffles make it look big, it is astonishlingly soft and comfortable to wear. The pattern includes 11 pages with many drawings and pictures. Basic knowledge in RAW is...

  • Biology is a very dimensional bracelet. The rivoli is not visible from every angle, which makes this piece even more an eye catcher. The pattern includes 10 pages with many drawings and illustrations. 

    Beading level 2

    required...

  • A sparkling bracelet in an interesting shape, created by a mix of RAW and Hubble stitch. The pattern includes 12 pages with many drawings and pictures.

    Level: 2 (basic knowledge in RAW required)

    Supplies: Chatons 8mm (SS39),...

  • A very elegant and sparkling piece of jewelry, that is "be still my heart". The pattern includes 9 pages with detailed drawings and pictures.

    Beading level 1 to 2

    Required supplies: 4mm bicones and round beads, Seed beads size 11°...

  • A bracelet made from many 6mm round beads. Either colorful or sparkly, just as you like. The pattern includes 8 pages with many drawings and pictures. 

    Beading level 1 to 2

    Required supplies: Round beads 6mm, .seed...

  • These statement Bangles just rock! They are made in netting technique and the shape is created by the bead size only. The pattern is for free, just choose the language and you can instantly download it.


    Required...

  • A beaded caterpillar, that one day, when it grew up, will be a beautiful butterfly.

    This pattern is free. Enjoy it.

  • A very special bangle, inspired by a piece of ancient jewelry that I saw in Villa Giulia in Rome. The nine components are attached in a way, that this bangle is sturdy and flexible in one.

    The pattern includes 14 pages with many drawings...

  • Your wrist will sparkle! 24 Chatons are supported by manc bicones and the facets of Half Tilas. The pattern includes 12 pages with many drawings and pictures.

    Beading level 2

    Required supplies: Half Tilas, round...

  • This statement bangle is "so strong!" The mix of O beads, spiky buttons and bicones creates unique accents. The pattern includes 10 pages with multiple drawings and step by step pictures.

    beading level 1 to 2

    Required supplies:...

  • This bracelet made from bicones rivolis and round beads, is a sparkling beauty and not so labor intensive to be finished.  The three strands of the bracelet sparkle on three levels, which creates a vivid dimensional structure. The...

  • This sparkling bracelet was obviously inspired by the beautiful moon over Tuscany. Despite its size it is still very light weight (23g), which is caused by the use of Cotton Pearls.
    The pattern includes 12 pages with many detailed drawings...

  • This filegree bracelet is not difficult to make. The instructions include many drawings and pictures.

    Beading level 2

    Supplies: Dome beads 12x7mm, firepolished beads, Bicones and round beads in 3mm, seed beads size 11° and 15,...

  • The Joan of Arc bangle comes in three different sizes. Crystals and pearls give it an antique appearance. The pattern includes 14 pages with many detailed drawings and pictures. 

    Required supplies: Chatons 8mm, round beads 3 und...

  • These tiny buttons are just irresistable and sparkle like crazy!

  • A set of 4 bangles, that you should not separate. Knowledge in RAW stitch is required. The pattern includes 15 pages full of pictures and drawings.

    Required supplies: Seed beads size 11° and 15°, Button Beads, Dragon Scale...

  • These bangles are quite elastic and can be nicely pulled over the hand, when made with the right thread. I recommend Sonoko Nozue Beading thread. The pattern includes 11 pages with many drawings and pictures.

    Beading level 2...

  • These bangles are fun to make. They are finished quickly and for sure they will not be alone for a long time. They love to mingle on your wrist and the more the merrier!

    The instructions include 11 pages full of drawings and...

  • The matching kit for the pattern Triple Embraces of the book "Beadwork Evolution". The book must be purchased separately.

    The kit includes all the beads and a magnetic clasp to make this bracelet.

    Needles and thread are not...

  • The matching kits for the pattern Honey Honey, that you can find in the book "Beadwork Evolution"

    The pattern is not included in the kit.

    The kit includes all the beads and a clasp, needed for a bracelet of a total length of...

  • Catelyn is a splendid bracelet with a martial touch. The shimmering dome beads make it a very special eye catcher. The pattern includes 12 pages with many drawings and pictures.

    Beading level 2, a good tension is required.

    Supplies:...

  • Lady Sansa is a beautiful bracelet, consisting of different delicate embellishments. Where you have to handle rather tiny beads, a good basic knowledge in beadweaving, especially circular Peyote is required.  The pattern includes 22 pages...

  • Moonlight Serenade is a bracelet that highlights the beauty of the new coin beads from Swarovski Elements. The finished bracelet has a length of 20 cm, including the clasp. The pattern includes 15 pages, full with drawings and...

  • Another delicate bracelet, made from 8mm chatons.

    6 pages with many drawings and illustrations.

    Level 2

    The pattern was written in 2011 and is available as download only.


  • Here the rivoli is not on top, but on the bottom of the components, that allows a deep look inside the single unit.

    9 pages with many drawings and pictures.

    Level 2

    The pattern was written 2011 and is only available as...

  • A delicate bracelet made from bezeled 8mm rivolis.

    12 pages with many drawings and and pictures.

    Level 2

    The pattern was written in 2011 and is available as download only. 


  • Little beaded nests, connected with jump rings to a delicate bracelet.

    11 pages with many drawings and pictures.

    Level 2

    The pattern is available as download only and was written in 2011


  • Irene, this is a bracelet and a pendant, made in the same technique.

    17 pages with many drawings and illustrations.

    Level 2

    The pattern was written in 2012 and is only available as download.


  • This bracelet is a real eye catcher on your wrist.

    12 pages with many drawings and pictures.

    Level 2 to 3

    The pattern was written in 2011 and is available as download only.


  • A bracelet based on cubic RAW, made from many firepolished beads.

    9 pages with many drawings and images.

    Level 2 to 3

    The pattern was written in 2009 and is available as download only.


  • A nice starter for Peyote technique. The bracelet is easy and fast to make (compared with usual seed bead projects).

    8 pages with many drawings.

    Beading level 1

    Written in 2009

    The pattern is only available as...

  • Twinkelizer, these are Rivolis and bicones pure!

    10 pages with many drawings and pictures.

    Level 2

    The pattern was written in 2010 and is available as download only.


  • A simple bracelet made in Peyote technique. The stripe design invites you to make it colorful.

    7 pages with many drawings and images.

    Level 1 to 2

    The pattern was written in 2008 and is  available as download...

  • The shape of the bracelet reminds to the shape of the windows of venetian palaces.

    9 pages with many drawings and images.

    Level 2

    The pattern is available as download only and was written in 2010


  • This bracelet can be made in two or more rows. 

    9 pages with many drawings and images.

    Level 2

    The pattern was written 2010 and is available as download only. 


  • Little components, shaped like a pagoda, are connected to a sparkling bracelet.

    10 pages with many drawings and pictures.

    Level 2

    The pattern was written in 2010 and is only available as download.


  • Starlet is a delicate bracelet made from many little chatons.

    9 pages with many drawings and images.

    Level 1 to 2

    The pattern was written in 2010 and is only available as download.



  • A little centipede for the wrist.

    12 pages with many drawings and images.

    Level 2 to 3

    The pattern was written in 2010 and is available as download only.


  • A bracelet with a base in Peyote technique embellished with a sparkling net and a beautiful rivoli as focal piece.

    18 pages with many drawings and images. 

    Beading level 2

    Written in 2010, the pattern is only available as...

  • This bracelet combines three different  units to a sparkling sky for your  wrist.

    15 pages with many drawings and pictures.

    Level 2

    The pattern was written in 2009 and is available as download only.


  • The ivy leafs gave the bracelet its name. It is a nice project for beginners.

    10 pages with many drawings and images.

    Level 1

    The pattern was written in 2010 and is available as download only.


  • The sequel of Handle with care. Due to the attached chatons, the spikes are not so dominant in the design, which make the bracelet much more elegant. 

    15 pages with many drawings and images.

    Beading level 2 (good basic...

  • A beautiful bracelet made with spike beads. The pattern was written in 2012.

    12 pages with many drawings and pictures.

    Beading level 2

    Supplies: Spikes (7x17mm), Bicones 3mm, round beads 4 and 6mm, seed beads size 11 and...

  • The original design was based on a crochet rope, which made it impossible to write clear instructions. After a lot of trial and error, I created this fully beaded version. The 27 pages instruction shows in detailed steps, with many drawings and...

  • This pattern was written in 2011. The bracelet is easy to make and will be finished after a short time.

    13 pages with drawings and pictures.

    Beading level 1 to 2 (beginners with basic knowledge)

    Supplies: Hexagon beads size 8...

  • Rivers of Babylon is the new version of Babylon. The entire center was changed so it reminds me of a river running. 

    12 pages with many drawings and images.

    Beading level 1 to 2 (beginners with basic knowledge)

    Supplies:...

  • The Mingles (Mini Bead Bangles) are perfect for a little beadwork in between. If you cannot get the mini beads, no problem, they can be replaced with any other bead. This makes the mingles perfect also for beginners, or if you have some left...

  • A very opulent bracelet that will for sure catch some attention.

    15 pages with many drawings and pictures.

    Beading level 2 (knowledge in basic seed beading techniques required)

    Supplies: Rivoli 14mm, firepolished and round...

  • The Frankfurt Bead lace in a new dress. This was my first pattern and it deserved some renovation.

    This is a free pattern, just download and enjoy!



  • A beautiful bracelet, that can easily be modified into a necklace. Both variations are explained in the instructions.

    14 pages with many pictures and drawings.

    beading level 2 (basic knowledge in seed beading...

  • Pineapple is a bracelet in RAW technique, finished with a netting. It does not  take a lot of time to make it and you will have a nice eyecatcher around your wrist.

    14 pages with many drawings and pictures.

    Beading level 2...

  • You can only see the full beauty of this bracelet in real life. It is made from two levels and the upper one opens in a flexible way, when you put it around your wrist. Also the many bicones can sparkle in all their power on the...

  • When first finishing the bracelet, it reminded me to these old little cities int he mountains in Italy, where some of the houses literally seem to grow out of the rocks. The bracelet does not need much time to be finished and is  a...

  • The bracelet hase a wave structure what makes a great stage for the sparkling crystals.

    10 pages with many pictures and drawings

    Beading level 1 to 2 (basic knowledge required)

    Supplies: Firepolished beads in 3 and 4mm, round...

  • The spikes are arranged in a triangle shape and create an unusual base for the rivoli bezel. Spikes and Rivoli can show their whole beauty in these bracelets.

    13 pages with many drawings and pictures.

    Beading level 2 (basic...

  • Here you find the Spikes in an upright position, like the candles on a cake. It is quite comfortable to wear and does not need a lot of time to be finished. A real statement piece!

    15 pages with many drawings and pictures.

    Beading...

  • Moira is the first bracelet made in the "two level technique". You need to focus, not to get lost in the different paths.  

    19 pages with drawings and pictures

    Beading level 2 (you should be experienced with seed...

  • The new edition of Thistle (original was published 2009) makes the blossoms even more spikey. The use of O beads gives the design a more playful character.

    16 pages with many drawings and pictures.

    Beadinglevel 2

    Supplies:...

  • Dimensional Lace is a bracelet with bezeled chatons based on a beaded lace. It is flexibel and can be made in one or more rows.

    13 pages with many pictures and drawings.

    Beadinglevel 2 (basic knowledge required)

    Supplies:...

  • Let it grow, the new edition of a pattern from 2010. The bracelet is easy and relatively fast to make, so it is suitable also for less experienced beaders.

    13 pages with many drawings and pictures.

    Beading level 1 to 2 (basic...

  • A different kind of bracelet. Due to the arrangement, the bracelet fits like an aureole around the wrist. 

    8 pages with drawings and pictures.

    Beading level 1 to 2 (basic knowledge required)

    Supplies: Firepolished beads...

  • The single components of this bracelet reminded me to the famous tiles from Portugal, so the name Coimbra was born. The bracelet is easy to make.

    12 pages with step by step illustrations and pictures.

    Beading level 1 - 2 (basic...

  • A bracelet with an oriental touch, due to the ornamental embellsihments. It is not taking a lot of time to finish it and is also a project for less experienced beaders.

    12 pages, drawings, step by step pictures.

    Beading level 1 - 2...

  • A bracelet like an oriental carpet. These instructions do not only show you how to make odd count Peyote, but also how to embellish it in different ways.

    12 pages with detailed drawings.

    Beading level 1 -2  (basic experience in...

  • The single units of this bracelet look like little bonfires.

    14 pages with many detailed pictures and drawings.

    Beading level 1 - 2 (basic knowledge in seed beading is required)

    Supply list: Seed beads, Rizo beads, Superduo...

  • A bracelet in the look of a cuff. Based on a Konstruction of firepolished beads, it is rich embellished in a second step.  Ein Armband in der Optik eines Armreifens. The original instruction was written 2008, in 2013 it was written new and...