Patterns and Kits

Patterns and Kits

1 2
  • This bracelet, consisting of beaded rings around a fabric cord, is not a lot of work and so a lot of fun to make!

    The pattern includes 14 pages with many drawings and illustrations.

    Beading level 1-2

    Required...

  • A drop bead consisting of astonishingly light weight paper mache, is bezeled in a very delicate way. To prevent the pendant from tangling, it is mounted in a unique way. The pattern includes many drawings and illustrations on 20 pages....

  • This bracelet consists of many different Rizo beads and is just fun to make. Due to the colors and shape, it is the perfect summer project. This pattern includes 9 pages with many drawings and Illustrations. All techniques are shown in...

  • One leather band, two sliders, so you can wear them matching your mood and your outfit! The pattern includes 19 pages with many drawings and illustrations. A little knowledge in RAW technnique is helpful. 

    Beading level...

  • This sparkling bracelet shows little Pyramids on a base of flat Chenille stitch. Basic knowledge is required. The pattern includes 12 pages with many drawings and pictures.

    Beading level: 2

    Dieses funkelnde Armband zeigt kleine...

  • Cosimo, That is a gorgeous pendant with many little details. By using unfolied Rivolis in the center, the piece has its very own shimmer. The pendant is 6.5 to 6.5 cm, plus 6cm fringes. The pattern includes 24 pages with many pictures and...

  • Steppin Out is a sparkling bracelet, a real showstopper! Again a piece that consists of different components that can be combined in different variations. The pattern includes 15 pages with many drawings and illustrations....

  • This playful pendant shines especially in strong and funky colors. The pattern includes 20 pages with many photos and illustrations. Basic knowledge in RAW and cubic RAW is required.

    Beading level 2

    required...

  • The bracelet hase a wave structure what makes a great stage for the sparkling crystals.

    10 pages with many pictures and drawings

    Beading level 1 to 2 (basic knowledge required)

    Supplies: Firepolished beads in 3 and 4mm, round...

  • This bracelet appears light and soft but it has a very sturdy construction. The bezeled rectangle stones alternate with elegant loops. You should be familiar with RAW and CRAW to make this design. The pattern includes 14 pages with many...

  • This sparkling project gets its beauty through a large number of crystals. The special use of double RAW creates a nice dimensionality. The pattern includes 10 pages with many drawings and illustrations.

    Beading level: 2

    Required...

  • the shawl pin for more delicate lacework. It is reversible, so id does not matter if the needle flips over.

    The pattern includes 16 pages with many drawings and pictures.

    Beading level 2 (knowledge in CubicRAW...

  • Roxanne is a rather delicate short necklace with lots of playful details. Basic knowledge in RAW technique is helpful. The pattern includes 20 pages with many drawings and illustrations.

    Beading level: 2

    1 Rectangle Filigree from...

  • This precious sparkling necklace consists of a combination of different beading techniques which creates interesting three dimensional shapes. It is not too easy to make and knowledge in cubic right angle weave is required. The pattern is...

  • Marlene is an Artdeco inspired piece, so it was no question to name it after the famous diva. The pattern includes 16 pages with many drawings and pictures. Knowledge in RAW and CRAW stitch required.  

    Beading...

  • A long but slim and delicate pendant with little surprises. Although it is not too time consuming to make it, the structure as a combination of DCRAW and PRAW needed 27 pages to be written. Knowledge in CRAW/ PRAW (Prismatic Right Angle...

  • A gorgeous necklace that is despite its size quite light, thanks to the Cotton Pearls from Miyuki. A real statement piece!

    The pattern is 24 pages long with many drawings and pictures. Knowledge in RAW and working RAW in rounds is...

  • This beautiful long necklace shows a multitude of sparkling details. The single elements are connected through the rings, so all parts can move. The pattern includes 20 pages with many drawings and illustrations.

    For my american...

  • The Joan of Arc bangle comes in three different sizes. Crystals and pearls give it an antique appearance. The pattern includes 14 pages with many detailed drawings and pictures. 

    Required supplies: Chatons 8mm, round beads 3 und...

  • A very elegant and sparkling piece of jewelry, that is "be still my heart". The pattern includes 9 pages with detailed drawings and pictures.

    Beading level 1 to 2

    Required supplies: 4mm bicones and round beads, Seed beads size 11°...

  • This bracelet was inspired by floral ornaments of asian architecture. It is not very time consuming  and easy to make and its wide but flat shape makes this suitable for daily use.

    The pattern consists of 15 pages with many drawings...

  • A nicely wearable bracelet containing of bezeled rivolis, surrounded by a delicate frame. The pattern includes 14 pages with many drawings and pictures.

    Knowledge in RAW and Cubic RAW required.

    Beading level 2 (Knowledge in RAW...

  • Six different components make this necklace become a real eyecatcher. All parts can twist as there is no divverence between front or back wich makes the piece easy to wear.
    The pattern includes 19 pages with many drawings and illustrations....

  • A whole lot of squiggles are combined in this playful bracelet. The pattern is very detailed and includes 16 pages with many drawings and pictures. Basic knowledge in Cubic Right Angle Weave is required.  

    Beading level:...

  • This sparkling pendant has an impressive length of 12 cm, but its slim shapes makes it a wearable piece. The use of Resin stones makes it light weight. The pattern includes 18 pages with many drawings and pictures.

    Beading level: 2 - 3,...

  • A necklace in a beautiful technique mix. RAW and Herringbone joined to a necklace that is sturdy and flexible as well.
    The pattern includes 14 pages with many drawings and illustrations.

    Beading level 2

    Required supplies:...

  • This bracelet was inspired by scandinavian folk dances.  Although the ruffles make it look big, it is astonishlingly soft and comfortable to wear. The pattern includes 11 pages with many drawings and pictures. Basic knowledge in RAW is...

  • This statement bangle is "so strong!" The mix of O beads, spiky buttons and bicones creates unique accents. The pattern includes 10 pages with multiple drawings and step by step pictures.

    beading level 1 to 2

    Required supplies:...

  • The name of this necklace was a spontaneous idea, as it reminded me of the beautiful windows of the famous cathedral. The pattern consists of 19 pages with many drawings and pictures.

    Beadinglevel 2

    Required supplies: Rivoli 14mm,...

  • Inti, the god of the sun of the Inka. This pendant is fun to make, the tassels are woven in directly. Basic knowledge in CRAW is required. The pattern includes 16 pages with many drawings and illustrations.  Beading level:...

  • This bracelet made from bicones rivolis and round beads, is a sparkling beauty and not so labor intensive to be finished.  The three strands of the bracelet sparkle on three levels, which creates a vivid dimensional structure. The...

  • This playful and delicate pendant is suitable as jewelry but also works perfect as an ornament.
    The pattern includes 24 pages with many drawings and illustrations.

    Basic knowledge in Cubic Right Angle Weave is required.

    Required...

  • A delicate bracelet with alternating bezeled filigrees and Chatons. The pattern includes 16 pages with many drawings and pictures.

    Knowledge in RAW is required

    Beadinglevel 2

    Required supplies:

    4 square filigrees...

  • A delicate necklace combining filigree components. The pattern includes 18 pages with many pictures and illustrations. 

    Beadinglevel 2

    Required Supplies:

    (for a necklace of 96cm length)

    16 round beads...

  • A sparkling bracelet in an interesting shape, created by a mix of RAW and Hubble stitch. The pattern includes 12 pages with many drawings and pictures.

    Level: 2 (basic knowledge in RAW required)

    Supplies: Chatons 8mm (SS39),...

  • A very special bangle, inspired by a piece of ancient jewelry that I saw in Villa Giulia in Rome. The nine components are attached in a way, that this bangle is sturdy and flexible in one.

    The pattern includes 14 pages with many drawings...

  • In this sparkling necklace you find alternating smaller and bigger spheres. The arcs of the bigger spheres are very delicate. Small crystal rondelles create a very unique sparkle in this piece. The pattern includes 16 pages with many pictures...

  • This little pendant, that can easily be strung to asmall rope or a cord, is a nice project for beginners.

    7 pages with many drawings and images.

    Also suitable for beginners.

    Supplies: Round beads 8mm, Bicones 3 and 4mm, seed...

  • You can only see the full beauty of this bracelet in real life. It is made from two levels and the upper one opens in a flexible way, when you put it around your wrist. Also the many bicones can sparkle in all their power on the...

  • A set of 4 bangles, that you should not separate. Knowledge in RAW stitch is required. The pattern includes 15 pages full of pictures and drawings.

    Required supplies: Seed beads size 11° and 15°, Button Beads, Dragon Scale...

  • Meadow is a nice bracelet, featuring the new Gekko beads. They are arranged to little flowers. The pattern includes 8 pages with detailed instructions, drawings and pictures.

    Beading level 1

    Required supplies: Gekko beads, Delica...

  • A delicate  sparkling bracelet in a lace style. The pattern includes 14 pages with detailed drawings and illustrations.

    Beading level 1-2

    Required supplies: Round beads and bicone beads 3mm, Seed beads size 11° and 15°,...

  • This necklace, made from many tiny seid beads, consists of three spheres, that are connected with tiny ropes. It takes a bit effort to finish it, but ist delicate look pays off after it is finished. The pattern includes 16 pages with detailed...

  • If you ever drove a car in Cologne, you know the rings! So there is a saying: Once on the ring and you will stay on the ring forever!.

    The pattern includes 12 pages with many drawings and pictures.

    Beading level: 2

    Required...

  • This project was created for beading newbies and is explained very detailed on 20 pages in many step by step pictures and drawings. But still it offers plenty of sparkle. Advanced beaders will enjoy the pure fun of making these...

  • This bracelet reminded me of raindrops hitting the ground. However you may blame it to the actual heatwave! This fun project is explained on 10 pages with many drawings and pictures.

    Beading level 1-2

    Required...

  • This bracelet was inspired by the gorgeous jewelry of the beginning of the 20th century. The center is a filigree, surrounded by sparkling stones. The pattern includes 25 pages with many drawings and illustrations. Basic knowledge in RAW and...

  • Thgis bracelet reminded me of the good old sine curve from the math lessons at school, but I have to admit, that it is much more pleasant and sparkling! The pattern includes 16 pages with many drawings and illustrations. Knowledge in CRAW is...

  • Firenze is a nice delicate bracelet, that is based on Chenille stitch and covered with different embellishments. The pattern includes 18 pages with many pictures and illustrations. Basic knowledge in CRAW and Peyote required....

  • Flores is a pendant in the new Double CRAW technique. A beaded challenge to see the possibilities of this stitch. The pattern includes 20 pages with many drawings and illustrations.

    Knowledge in RAW and Cubic RAW is required.

    ...

  • A long necklace with a sparkling filigree pendant in a heart shape. The pattern includes 24 with many pictures and illustrations.  To make this piece, you need some experience. Techniques in this piece are chenille stitch and circular...

  • The different kind of pendant. Where I am convinced, that somewhere in the abyss there is a creature looking exactly like this, I decided to call it Nautilus.  The pattern includes 26 pages with many pictures and illustrations. Basic...

  • A ring shaped pendant, embellished with little blossoms. The pendant is made in Chenille stitch. The chain part is made in CRAW, basic knowledge in CRAW is required. The pattern includes 16 pages with many drawings and...

  • This project was created especially for less experienced beaders. As in Roundabout, the instructions are very detailed and do not require special knowledge in beading techniques.

    The pattern includes 15 pages with many drawings and...

  • Flower Pin is a new shawl pin, this time on an oval design. The pattern includes 20 pages with many drawings and illustrations. 

    Beading level 2

    Required supplies:

    1 shawl pin oval (85x 55mm) 

    3 round...

  • Biology is a very dimensional bracelet. The rivoli is not visible from every angle, which makes this piece even more an eye catcher. The pattern includes 10 pages with many drawings and illustrations. 

    Beading level 2

    required...

  • Polina is a pendant that reminds me of a little dancing ballerina The pattern includes 19 pages full of drawings and illustrations. Knowledge in RAW and CRAW technique is required.en.

    Required supplies: Dome Beads 10 x 6 mm, Rizo,...

  • This delicate amulet may catch all your beady dreams.  The pattern includes 15 pages with many drawings and pictures.

    Basic knowledge in RAW is required. 

    Beading level 2

    Required supplies:

    For a...

  • Clematis is a necklace in a fresh spring style. The project includes different techniques, shown in step by step drawings and pictures on 18 pages. Knowledge in cubic RAW is required. Although the technique is shown in the instructions, an...

  • Fandango is a playful necklace with many little details. The pattern includes 23 pages with many drawings and pictures. 

    Beading level: 2 - 3 (knowledge in RAW and CRAW required)

    Required supplies: Lasercuts Square 30 x...

  • Vienna is a bit smaller then the other crosses I made and has a rivoli only on one side, what makes it more suitable for shorter necklaces.

    22 pages with many drawings and pictures.

    Beadinglevel 3 (expert)

    Supplies: Rivoli...

  • This bracelet enhances the unique shimmer of the dome beads. The pattern includes 12 pages with many pictures and illustrations. 

    Beading level: 2,basic knowledge in RAW technique required

    required supplies: Dome Beads 14...

  • The sequel of Handle with care. Due to the attached chatons, the spikes are not so dominant in the design, which make the bracelet much more elegant. 

    15 pages with many drawings and images.

    Beading level 2 (good basic...

  • The necklace with a spin. Not only the pattern is twisting around the rope, also the little rings spin around it. The necklace includes different techniques, all united in this one piece. Basic knowledge in RAW is required.  14 pages...

  • A real statement cuff! 30x 30mm lasercuts are separately bezeled and then combined. With 5 segments, this bracelet has a length of 22cm (8 1/2 inches) Changes in the length are possible and described in the instructions....

  • A playful pendant that reminded me of the antique Montgolfieres. The sparkling Rivolis that are not only surrounding the sphere but also part of the fringes create a very unique sparkle, The pattern includes 19 pages with many drawings and...

  • A light sparkling version of a bracelet. It combines chatons and rivolis with gentle arcs on the outline. The pattern includes 16 pages with detailed drawings and pictures.

    Beading level 2

    Required supplies: Rivolis 14mm, chatons...

  • Little Max is back with completely new step by step drawings for the basic bead and many drawings for their variations. Included are three brand new beaded beads with different applications.

    37 pages with many drawings and...

  • The new edition of Thistle (original was published 2009) makes the blossoms even more spikey. The use of O beads gives the design a more playful character.

    16 pages with many drawings and pictures.

    Beadinglevel 2

    Supplies:...

  • The structure of this fancy bracelet  reminds of a harlekins collar. The pattern includes 11 pages with many drawings and illustrations.

    Beading level 2

    Required material:Round beads 8mm, firepolished...

  • Curizo is a little cube, made from 6 equal components, that are connected in the last row. The finished cube can easily be strung to a cord.

    12 pages with detailed illustrations and pictures.

    Beading level 2 (advanced)

    Supply...

  • Hester is a delicate pendant for a long necklace that introduces two metal filigrees combined with a bezeled rivoli. The pattern includes 18 pages with many drawings and pictures. Knowledge in RAW and CRAW are required.

    beading level...

  • Lady Mary is an opulent pendant with a delicate chain part. Its strong colors are the special highlight. Basic knowledge in RAW and Cubic RAW is required. The pattern includes 16 pages with man drawings and pictures.  

    Beading...

  • This bracelet has some wave shape due to the different sizes of the focals. The use of Cotton pearls and Resin rivolis makes it way lighter than it might seem due to its opulence. 

    Beading level 1-2

    Required supplies: Rivolis...

  • Your wrist will sparkle! 24 Chatons are supported by manc bicones and the facets of Half Tilas. The pattern includes 12 pages with many drawings and pictures.

    Beading level 2

    Required supplies: Half Tilas, round...

  • Montparnasse is the first necklace featuring the new Lasercuts from Bartel Elements. Due to the mounting of the single parts, the necklace can easily be adjusted and gently curves around every neck.  Knowledge in RAW und CRAW...

  • A little Thank You from me to you! Waves is easy to make, also for less experienced beaders. And the experienced ones might like the quick success! An all day wearable piece for you or your friends.

    Enjoy the project, just choose the...

  • Hold me is a sparkling embellished shawl pin. The irregular natural look of the ring creates a nice contrast to the colorful beadwork.

    The pattern includes 18 pages with many pictures and illustrations.

    Beading...

  • A spectacular ring, that will get attention. With it's medieval touch, it will excite you. The pattern includes 17 pages, with many detailed pictures and drawings. Knowledge in RAW technique is required. 

    Beading level...

  • Dimensional Lace is a bracelet with bezeled chatons based on a beaded lace. It is flexibel and can be made in one or more rows.

    13 pages with many pictures and drawings.

    Beadinglevel 2 (basic knowledge required)

    Supplies:...

  • Sonnborner Kreuz is named after a turnpike in Germany that most people know from traffic radio. The pendant uses the many possibilities of Double CRAW in combination with CRAW which creates a very interesting dimensionality. Knowledge in CRAW...

  • Acrazy ring but for sure a real eye catcher. 

    12 pages with many drawings and pictures.

    Beading level 2 (basic knowledge in seed beading requred)

    Supplies: Rivoli 14mm. bicones 3 and 4mm, seed beads size 11 and 15,...

  • This beautiful morning Star is due to the use of  resin navettes and Cotton Pearrls not only very playful and delicate but also very light weight.  The pattern includes 20 pages with many drawings and pictures. 

    Knowledge...

  • This delicate bracelet with the fan shapet units is easy and fast to make. The pattern includes 10 pages with many drawings and pictures.

    Beading level 1 

    Required supplies: 

    For a bracelet of 19 cm including the...

  • Here you find the Spikes in an upright position, like the candles on a cake. It is quite comfortable to wear and does not need a lot of time to be finished. A real statement piece!

    15 pages with many drawings and pictures.

    Beading...

  • A different kind of bracelet. Due to the arrangement, the bracelet fits like an aureole around the wrist. 

    8 pages with drawings and pictures.

    Beading level 1 to 2 (basic knowledge required)

    Supplies: Firepolished beads...

  • These little baskets (about 3 1/2 x 2 inches) are first made in crochet technique and will then be embellished with little beads.

    The pattern includes many pictures and step by step instructions on 25 pages. Basic knowledge in crochet is...

  • The single components of this bracelet reminded me to the famous tiles from Portugal, so the name Coimbra was born. The bracelet is easy to make.

    12 pages with step by step illustrations and pictures.

    Beading level 1 - 2 (basic...

  • The matching kits for the pattern "The Round Cubel" of the book "Beadwork Evolution".

    The pattern is not included in the kit, the book must be purchased separately.

    The kit includes all the beads required for one...

  • This long chain is a real eye catcher but still suitable for daily use. Making it does not take too long. On 15 pages with many detailed pictures and drawings you are shown how to make it.

    beading level 2 (knowledge in RAW stitch is...

  • The spikes are arranged in a triangle shape and create an unusual base for the rivoli bezel. Spikes and Rivoli can show their whole beauty in these bracelets.

    13 pages with many drawings and pictures.

    Beading level 2 (basic...

  • This project includes alternating CRAW and Double CRAW units and is perfect for learning that technique.

    Just choose the language and open the file. 



  • Small delicate Bangles, made from Button Beads and Emma Beads.


  • These tiny buttons are just irresistable and sparkle like crazy!

  • This bracelet is soft and flexible and matches every wrist.

    Happy Beading!


  • Claspgarten brought my idea to life. An earring with an easy to bezel system. No glue required. So I did not want to keep this away from you.



  • The matching kits for the pattern Honey Honey, that you can find in the book "Beadwork Evolution"

    The pattern is not included in the kit.

    The kit includes all the beads and a clasp, needed for a bracelet of a total length of...

  • The matching kits for the pattern "Anastasia" of the book "Beadwork Evolution.

    The pattern is not included in the kit, the book must be purchased separately.

    The kit includes all the beads, rings and a clasp required for one...

  • Simplicious is an easy to make bracelet with a lovely texture. The pattern is for free, simply choose your language and download it.


  • A beaded caterpillar, that one day, when it grew up, will be a beautiful butterfly.

    This pattern is free. Enjoy it.

1 2